• 1 meter HHO PTFE Teflon pipe hose OD 8mm x ID 6mm up to 260°C strong electrolyte resistant HHO Kit
1 1

PTFE pipe HHO hose OD 8mm x ID 6mm up to 260°C for HHO Kit HHO Generator

PTFE pipe HHO hose OD 8mm x ID 6mm up to 260°C for HHO Kit HHO Generator

€1,23
€5,00 €1,23
Sale Sold out
Taxes included. Shipping calculated at checkout.

HHO pipe push-n-go for HHO KIT X-CELL HHO Generator

Outer diameter 8mm; Inner diameter 6mm; Length 1meter; 

Description:

Properties Method Unit

Typical Values
(from-to)
Specific gravity ASTM D792 - 2,14 - 2,20
Tensile strength ASTM D1457 N/mm2 20 - 35
Elongation at break ASTM D1457 % 210 - 400
Compressive strength 1% deformation ASTM D695 N/mm2 4,00 - 4,50
Deformation under load 14 N/mm2
for 24hrs		 ASTM D621(1) % 10 - 15
Flexural strength 0,7 N/mm2 ASTM D790 N/mm2 no break
Impact strength (Izod) 57°C ASTM D256 J/cm 1,10
Impact strength (Izod) 23°C ASTM D256 J/cm 1,60
Impact strength (Izod) 77°C ASTM D256 J/cm 3,30
Hardness ASTM D2240 (shoreD) 50 - 60
Friction coefficient - static ASTM D3028 (2) - 0,09
Friction coefficient - dynamic ASTM D3028 (2) - 0,05
PTFE - steel oil lubricated - - 0,02 - 0,06
Working temperature range - °C -200 / +260
Increase in volume from room
temperature to molten state (340°C)		 - % 27 - 28
Coefficient of thermal expansion
from 25 to 100°C		 ASTM E831 °C-1 16 x 1-5
Thermal conductivity ASTM D2214 W/mK 0,20
Specific heat 0°C - KJ/kg.K 0,96
Specific heat 50°C - KJ/kg.K 1,05
Temperature of distortion 0,46 N/mm2 ASTM D648 °C 130 - 140
Temperature of distortion 1,85 N/mm2 ASTM D648 °C 50 - 60
Dielectric strength (short-time
air thickness 0,5 mm)		 ASTM D149 kV/mm 55
Dielectric constant ASTM D150 - 2,10
Dissipation factor ASTM D150 - <0,0002
Volume resistivity ASTM D257 Ohm/cm 10-17
Surface resistivity ASTM D257 Ohm 10-15
Arc-resistance ASTM D495 sec OK (4)
Water absorption ASTM D570 % <0,01
Flammability ATB ASTM D635 sec <5,00
Flammability AEB ASTM D635 mm <5,00

 

Temperature:
The lower operating temperature limit is usually set by the metal housing and -29°C is the typical lower working limit, however with the correct supporting materials and design PTFE is perfectly capable of working at cryogenic temperatures-200-260°C. The upper-temperature limit is set by the fluoropolymer, and as mentioned previously not by the “lab” specification, but the strength of the materials at temperature and 260°C is the usual maximum – and even this is quite challenging for the materials. When selecting lined equipment, however, one must think of the maximum and minimum temperatures, the potential for thermal shock and upset conditions.

View full details

Best Saving fuel with Installation: Enhanced Engine Performance

Testimonials

  • Chris Wallace - Texas

    I was tipped off about the ion kit by a buddy down at the Dallas truck stop, and dang, am I glad I went for it. Not only have the savings on diesel been mighty impressive, but the power kick it adds to my diesel truck is something else. Now, driving through the wide Texas plains is more thrilling than a rodeo. Worth every dime!

  • Emma Brown (London)

    The ion technology kit has transformed my diesel motor both into a nippy little runner and a thriftier fuel consumer. I can’t believe I was pottering about in London traffic without this upgrade. It’s honestly a bobby dazzler—scooting around corners with barely a sip of diesel. Plus, the savings on fuel mean more quid for the pub on Friday nights!

  • Smooth Ride Like Never Before"Carl Henderson (Nevada)

    I've been using the Power of Ions Kit in my gasoline car for three months now, and the difference is incredible! Before, I noticed my car would often struggle with rough idles and a noticeable lack of power during acceleration. Since installing the kit, not only has the engine felt smoother, but my fuel efficiency has improved significantly. It's like I'm driving a brand new car! The installation was straightforward, and the benefits were immediate. I'm truly impressed by how this small change has made such a big impact on my car’s performance. I recommend the Power of Ions Kit to any gasoline car owner who wants to enhance their vehicle's efficiency and overall driving experience.

  • Peter - A Game-Changer for My Diesel Engine!

    Before installing the Power of Ions kit on my 4-cylinder diesel, I was skeptical about the promised improvements. However, after just a 8km of use, the difference in performance and efficiency was undeniable. Not only has my fuel consumption decreased by about 30%, but the responsiveness of my engine has dramatically improved. The torque increase is palpable—my vehicle feels more powerful and nimble. It's like I've unleashed a whole new level of potential from my engine. This ion technology isn't just an upgrade; it's a revolution for any diesel engine. Highly recommended for anyone looking to boost their vehicle's performance while cutting down on fuel costs!